Local Service near Lynton and Lynmouth 

---

1.      Where should be the electric shower installation?

Installing an electric shower requires careful planning to ensure safety and functionality. Here are the key considerations for where it should be installed:

1.      Water Supply Proximity: The electric shower should be installed where there is easy access to a cold water supply. The water supply must be adequate to provide a consistent flow rate for the shower.

2.      Electrical Supply: It must be installed near an appropriate electrical supply. This typically involves a dedicated circuit with a suitable rating (e.g., 30-45 amps) and an isolator switch outside the bathroom to control the power to the shower.

3.      Bathroom Zones: Electric showers should be installed in compliance with the bathroom zoning regulations (e.g., IP ratings). Usually, it should be in Zone 1 (within the shower area) but safely away from direct spray if possible.

4.      Height and Positioning: The shower unit should be at a convenient height for users. Typically, the shower head should be positioned 200 cm (about 6.5 feet) from the floor. The controls should be easily reachable.

5.      Ventilation: Install the electric shower in a well-ventilated area to prevent excessive moisture buildup which can lead to mold and mildew.

6.      Professional Installation: Installation should be done by a qualified electrician and plumber, following local building codes and regulations.

7.      Accessibility: Consider accessibility for maintenance and repairs. The unit should be placed in a way that allows easy access to the internal components if needed.

8.      Safety Measures: Ensure the installation includes necessary safety measures, such as an RCD (Residual Current Device) to protect against electric shock.

By adhering to these guidelines, you ensure the electric shower is safe, functional, and compliant with local standards.

2.      Can electric shower installation fail?

Yes, electric shower installations can fail. Here are some common reasons for failure and how to prevent them:

1.      Inadequate Electrical Supply: If the circuit is not rated correctly for the power demand of the shower, it can lead to frequent tripping of the circuit breaker or even electrical fires. Ensure the circuit meets the specifications of the shower unit, typically 30-45 amps.

2.      Incorrect Wiring: Faulty or incorrect wiring can cause the shower to malfunction or become a safety hazard. Use a qualified electrician to ensure all connections are made properly and securely.

3.      Insufficient Water Pressure: Electric showers require a certain minimum water pressure to operate correctly. If the water pressure is too low, the shower might not function or provide a weak flow. Ensure your water supply meets the manufacturer's minimum pressure requirements.

4.      Improper Positioning: Installing the shower in an area prone to water spray can cause water ingress into electrical components, leading to short circuits and failures. Place the unit outside the direct spray path as much as possible and ensure it is adequately sealed.

5.      Lack of Ventilation: Poor ventilation can lead to moisture buildup, which can damage electrical components over time. Ensure the bathroom has adequate ventilation, like an exhaust fan, to remove excess moisture.

6.      Inadequate Earth Bonding: Without proper earthing, there's a risk of electric shock. Ensure the shower is correctly earthed according to local electrical codes.

7.      Ignoring Manufacturer Instructions: Each electric shower has specific installation guidelines. Not following these can lead to operational issues and void warranties. Always follow the manufacturer's installation and user instructions.

8.      Overloading the Electrical System: Adding an electric shower to an already overloaded electrical system can cause circuit failures and pose safety risks. Assess the overall electrical load and upgrade the system if necessary.

9.      Improper Water Connections: Leaks or improper connections can lead to water damage and potential electrical hazards. Use a qualified plumber to ensure all connections are secure and leak-free.

10.  Absence of RCD: An RCD (Residual Current Device) is crucial for safety, as it can cut off the power in case of a fault. Ensure an RCD is installed and functioning.

By addressing these potential issues, you can significantly reduce the likelihood of electric shower installation failures and enhance safety and reliability.

3.      Can you stop the electric shower installation midway?

Yes, you can stop an electric shower installation midway, but it's essential to follow certain precautions to ensure safety and avoid damage. Here’s what to consider if you need to halt the installation:

1.      Turn Off Power Supply: Ensure the electrical supply to the shower is completely turned off at the main circuit breaker. This prevents any risk of electric shock or short circuits.

2.      Secure Water Supply: Turn off the water supply to the shower to prevent any leaks or water damage.

3.      Secure Electrical Wires: Ensure all electrical wires are safely capped or insulated to prevent accidental contact. Use wire nuts or electrical tape to cover exposed wires.

4.      Seal Water Pipes: Temporarily seal any open water pipes to prevent leaks. Use appropriate caps or plugs designed for plumbing systems.

5.      Keep the Area Safe: Make the area safe by tidying up tools and materials. Remove any trip hazards and ensure the working area is not accessible to unauthorized persons, especially children.

6.      Document the Work: Take note of what has been done so far, including any connections made, components installed, and any parts left exposed. This documentation will help when resuming the installation.

7.      Reschedule the Work: Plan when you will resume the installation. If you’re using professional installers, communicate with them to set a new date for continuing the work.

8.      Check for Compliance: Ensure any interim stoppage complies with local building and electrical codes, especially if the installation involves exposed wiring or plumbing.

Stopping the installation midway is sometimes necessary due to unforeseen circumstances, but taking these precautions will help ensure safety and make it easier to resume the installation later without complications.