Local Service near Lickfold 

---

1.      What if the electric car home charger installation failed?

If the electric car home charger installation fails, it’s important to identify and address the issue promptly to ensure safety and functionality. Here are the steps you should take if you encounter a failed installation:

Steps to Take If Installation Fails

1. Identify the Problem

• No Power: Check if the charger is receiving power. Look for any indicator lights on the charger.
• Error Messages: Many chargers display error messages or codes. Refer to the user manual for interpretation.
• Connectivity Issues: Ensure the charger is properly connected to both the vehicle and the power source.

2. Check Basic Troubleshooting Steps

• Reset the Charger: Some chargers have a reset button. Try resetting the charger to see if it resolves the issue.
• Check Circuit Breakers: Ensure the circuit breaker for the charger’s dedicated circuit hasn’t tripped. Reset it if necessary.
• Inspect Connections: Verify that all connections are secure and that there are no loose wires or connectors.

3. Contact the Installer

• Report the Issue: Contact the installer immediately and explain the problem. Provide details such as error codes or symptoms.
• Warranty and Support: Most professional installations come with a warranty. The installer should offer support and potentially a follow-up visit to diagnose and fix the issue.

4. Professional Inspection

• Electrical Check: A qualified electrician should inspect the installation to ensure it meets all safety standards and is correctly installed.
• Reinstallation: If necessary, the installer may need to reinstall or replace the charger.

5. Consult the Manufacturer

• Technical Support: Contact the charger manufacturer’s technical support team for additional guidance and troubleshooting.
• Replacement: If the charger is faulty, the manufacturer should replace it under warranty.

Common Causes of Installation Failure

1. Electrical Issues:
• Inadequate power supply or improper electrical connections.
• Faulty wiring or insufficient electrical capacity in the home’s system.
2. Faulty Equipment:
• Defective charger unit or damaged cables.
• Manufacturing defects or shipping damage.
3. Installation Errors:
• Incorrect installation practices or not following manufacturer guidelines.
• Inexperienced or uncertified installers.
4. Compatibility Issues:
• Incompatibility between the charger and the vehicle’s charging port or onboard charging system.

Preventive Measures

1. Qualified Installers:
• Always use certified and experienced installers who follow industry standards and guidelines.
2. Pre-Installation Survey:
• Conduct a thorough pre-installation survey to identify any potential issues with your home’s electrical system.
3. Quality Equipment:
• Purchase chargers from reputable manufacturers known for quality and reliability.
4. Regular Maintenance:
• Perform regular maintenance checks and follow the manufacturer’s guidelines for upkeep.

Legal and Safety Considerations

• Regulatory Compliance: Ensure the installation complies with UK regulations, such as BS 7671 wiring standards.
• Safety First: Never attempt to fix electrical issues yourself unless you are a qualified electrician. Safety should be the top priority.

Conclusion

If your electric car home charger installation fails, identifying the problem and contacting your installer for support are the first steps. Ensuring that you use qualified professionals and high-quality equipment can help prevent installation failures and ensure a safe and efficient charging setup for your electric vehicle.

2.      What is included in the electric car home charger installation kit?

An electric car home charger installation kit typically includes all the necessary components and accessories required for a complete and compliant installation. Here’s a detailed breakdown of what is usually included:

Components of an Installation Kit

1.      Charging Unit (EVSE - Electric Vehicle Supply Equipment):

o    The main component that delivers power to your electric vehicle. It can be tethered (with an attached cable) or untethered (requiring a separate cable).

2.      Charging Cable:

o    Tethered Charger: Comes with a fixed cable attached to the unit.

o    Untethered Charger: You may need to provide your own cable that matches your EV's connector type (commonly Type 2 in the UK).

3.      Mounting Bracket and Hardware:

o    Brackets, screws, and anchors to securely mount the charger on a wall or other suitable surface.

4.      Electrical Wiring:

o    Cables and wires necessary to connect the charger to your home's electrical supply. This includes conduit, connectors, and junction boxes if needed.

5.      RCD (Residual Current Device):

o    A safety device that automatically disconnects the power supply if it detects an electrical fault, protecting against electric shock.

6.      MCB (Miniature Circuit Breaker):

o    A type of circuit breaker that protects the electrical circuit from damage caused by overload or short circuit.

7.      Drilling Template:

o    A template to guide the installer in drilling holes for mounting the charger.

Additional Items and Tools (May Be Provided by Installer)

1.      Electrical Tools:

o    Screwdrivers, drills, wire strippers, voltage testers, and other tools needed for electrical work.

2.      Cable Clips and Ties:

o    Used to manage and secure cables neatly.

3.      Weatherproofing Materials:

o    Seals or gaskets for outdoor installations to protect against weather conditions.

4.      User Manual and Installation Guide:

o    Instructions for both the installer and the user on how to properly install and use the charger.

Professional Installation Services

When you hire a certified installer, they typically bring additional equipment and tools to ensure a compliant and safe installation. This can include:

·         Electrical Safety Testing Equipment: To verify the installation meets safety standards.

·         Protective Equipment: Such as gloves and goggles for safe handling of electrical components.

·         Inspection and Certification Documents: For compliance with local regulations and standards.

Government Grant Requirements

If you are applying for the EV Chargepoint Grant (formerly OLEV Grant), ensure the installation kit and the installer meet the following criteria:

·         Approved Equipment: The charger must be on the list of approved models eligible for the grant.

·         Certified Installer: The installation must be carried out by an installer approved under the grant scheme.

Summary

An electric car home charger installation kit includes the charging unit, necessary cables, mounting hardware, electrical wiring, and safety devices like RCDs and MCBs. Additional tools and materials for a successful installation may be provided by the installer. Using a certified installer and approved equipment is crucial for safety and compliance, especially if you are utilizing government grants to offset the costs.